My Whirlpool Heavy Duty washing machine recently stopped spinning and agitating during its wash cycles. I decided to make a repair myself, and have captured the steps I took below. I also made a video of the repair to help others who encounter similar problems. Similar steps can likely be used on other washing machines, particularly ones from related brands, such as Maytag. My washing machine would not spin or agitate, however it would drain fine, so I knew that the problem was not with the motor and instead was due to any issue with the motor delivering power to the tub and agitator. Other symptoms included a loud mechanical chattering/rattling sound whenever the spin cycle was engaged. The machine I repaired had the following characteristics: Brand: Whirlpool Model: LSQ9244EQ0 The model number can be found on a sticker on the machine, which on top loading machines is often located the rear edge of the loading opening, beneath the lid. Parts You'll Need Completing the repair requ
I recently decided to replace my ageing shower head with a newer model. After doing some research, I decided to install a Moen Attract 4-inch 6-function hand shower with Magnetix docking system. Not wanting to pay a plumber for the installation, I decided to complete the install on my own. While I worked, I captured the steps tat I took on a video so that other people could use it as reference material for their own installation. I inserted the video that resulted at the end of this post. For your reference, I'm also going to post the shower parts and tools that I used to complete the install. Parts Completing the install only required the purchase of a new shower head or hand shower. This is the one I got and I am very happy with it: Moen Magnetix Six-Function Handheld Showerhead with Magnetic Docking System (paid link) To make the install go smoothly and to help protect against leaks, it's a good idea to wrap the threads with some plumber's tape (PTFE tape).